Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear Special Tools J-8092 Driver Handle Equivalent regional tools: Special Tools Removal Procedure

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear — figure 1

1. Remove the transfer case shift cam shaft bearing (1) from the rear case half. Installation Procedure

Transfer Case Four Wheel Drive Actuator Lever Shaft Bearing Replacement - Rear — figure 2

Note

Ensure the printing on the bearing is facing upward.

1. Press the transfer case shift cam shaft bearing (1) into the case with a suitable adapter and the J-8092 Driver Handle until the transfer case shift cam shaft bearing (1) bottoms in the rear case half.