Skip to content
Tahoe / Yukon Service Manual

Radio Body Rear Corner Upper Garnish Molding Speaker Replacement

Radio Body Rear Corner Upper Garnish Molding Speaker Replacement Removal Procedure

  1. Disable the SIR system. SIR Disabling and Enabling
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 1
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 1
  1. Liftgate Weatherstrip (1) » Reposition
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 2
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 2
  1. Using a flat-bladed plastic trim tool, release the retaining clips.
  2. Body Side Rear Window Garnish Molding (1) » Reposition
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 3
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 3
  1. Body Rear Corner Upper Garnish Molding Bolt (1) » Remove
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 4
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 4
  1. Using a flat-bladed plastic trim tool, release the retaining clips.
  2. Body Rear Corner Upper Garnish Molding (1) » Remove
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 5
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 5
  1. Electrical Connector (1) » Disconnect
  2. Wiring Harness Retainer (2) » Remove
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 6
Radio Body Rear Corner Upper Garnish Molding Speaker Replacement — figure 6

  1. Body Rear Corner Upper Garnish Molding Bolt (1) » Remove [2x]

  2. Radio Rear Corner Upper Garnish Molding Speaker (2) » Remove Installation Procedure

  3. Radio Rear Corner Upper Garnish Molding Speaker (2) » Install

  1. Body Rear Corner Upper Garnish Molding Bolt (1) » Install and tighten [2x] — Fastener Specifications

  2. Wiring Harness Retainer (2) » Install

  3. Electrical Connector (1) » Connect

  4. Body Rear Corner Upper Garnish Molding (1) » Install

  1. Body Rear Corner Upper Garnish Molding Bolt (1) » Install and tighten — Fastener Specifications

  1. Body Side Rear Window Garnish Molding (1) » Install

  2. Liftgate Weatherstrip (1) » Reposition

  3. Enable the SIR System. SIR Disabling and Enabling