| 1 |
Were you sent here from the Hydraulic Brake Symptom table? |
Go to Step 2 |
Go to Diagnostic Starting Point - Vehicle |
| 2 |
1. Inspect the following hydraulic brake system components for brake fluid leaks: Flexible brake hose connections; threaded and bolted Flexible brake hose crimp joints Brake pipe fittings Caliper piston seals Brake master cylinder reservoir Brake master cylinder 2. Repair or replace components as necessary. Hydraulic Brake System Diagnosis Did you find and correct a condition? |
Go to Step 4 |
Go to Step 3 |
| 3 |
Replace the brake master cylinder. Did you complete the replacement? |
Go to Step 4 |
— |
| 4 |
1. Install or connect components that were removed or disconnected during diagnosis. 2. Road test the vehicle to confirm proper operation. Brake System Vehicle Road Test Is the condition still present? |
Go to Step 2 |
System OK |