Skip to content
Tahoe / Yukon Service Manual

Sun Load and Ambient Light and Security Indicator Sensor Replacement

Sun Load and Ambient Light and Security Indicator Sensor Replacement Removal Procedure

Sun Load and Ambient Light and Security Indicator Sensor Replacement — figure 1
Sun Load and Ambient Light and Security Indicator Sensor Replacement — figure 1
  1. Using a flat-bladed plastic trim tool, release the retainer clips.
  2. Disconnect the electrical connector.
  3. Instrument Panel Extension (1) » Remove
Sun Load and Ambient Light and Security Indicator Sensor Replacement — figure 2
Sun Load and Ambient Light and Security Indicator Sensor Replacement — figure 2

  1. Sun Load Temperature and Ambient Light and Security Indicator Sensor (1) » Remove Installation Procedure

  2. Sun Load Temperature and Ambient Light and Security Indicator Sensor (1) » Install

  3. Connect the electrical connector.

  4. Instrument Panel Extension (1) » Install