Rear Side Door Window Belt Reveal Molding Replacement

Single Use Fasteners and Components Rear Side Door Window Belt Reveal Molding

Rear Side Door Window Belt Reveal Molding Replacement — figure 1

1. Reposition the rear side door weatherstrip to access the rear side door window belt reveal molding bolts (1).
2. Rear Side Door Window Belt Reveal Molding Bolt (1) » Remove [2x]

Rear Side Door Window Belt Reveal Molding Replacement — figure 2

3. Using the appropriate tool, lift up the rear side door window belt reveal molding (1) to remove from the door flange.

4. Rear Side Door Window Belt Reveal Molding (1) » Remove and DISCARD Installation Procedure

5. Rear Side Door Window Belt Reveal Molding (1) » Install NEW

Caution

Refer to Fastener Caution.

2. Rear Side Door Window Belt Reveal Molding Bolt (1) » Install and tighten [2x] — Fastener Specifications
3. Reposition the rear side door weatherstrip.
4. Ensure the window system operates properly.