Skip to content
Tahoe / Yukon Service Manual

Instrument Panel Compartment Door Lock Cylinder Replacement

Instrument Panel Compartment Door Lock Cylinder Replacement Removal Procedure

Instrument Panel Compartment Door Lock Cylinder Replacement — figure 1
Instrument Panel Compartment Door Lock Cylinder Replacement — figure 1
  1. Make sure the instrument panel compartment door lock cylinder (1) is in the unlock 12 o’clock position.
  2. Position the instrument panel compartment door latch (2) in the up position and hold while accessing the poke hole (3).
  3. Apply a light load with a suitable tool and depress the retainer tumbler through the poke hole (3) on the instrument panel compartment door latch (2).
Instrument Panel Compartment Door Lock Cylinder Replacement — figure 2
Instrument Panel Compartment Door Lock Cylinder Replacement — figure 2
  1. While keeping the retainer tumbler (1) depressed, push the instrument panel compartment door lock cylinder (2) from the back of the instrument panel compartment door latch. Installation Procedure
  2. Set the tumblers of the instrument panel compartment door lock cylinder. Instrument Panel Compartment Door Lock Cylinder Coding
Instrument Panel Compartment Door Lock Cylinder Replacement — figure 3
Instrument Panel Compartment Door Lock Cylinder Replacement — figure 3
  1. Install the instrument panel compartment door lock cylinder (1) at the 12 o’clock position while holding the retainer tumbler (2) depressed into the instrument panel compartment door latch (3).
  2. Return the instrument panel compartment door latch (3) to the close position.
  3. Ensure proper operation of the instrument panel compartment door lock cylinder (1).