Tow Vehicle Electrical Receptacle Replacement

Removal Procedure

Tow Vehicle Electrical Receptacle Replacement — figure 1

1. Turn the 2 rear bumper fascia trailer hitch cover retainers (1)  a quarter turn counter clockwise and remove.
2. Carefully release the tabs and pull the rear bumper fascia trailer hitch cover (2)  down from the rear bumper fascia.

Tow Vehicle Electrical Receptacle Replacement — figure 2

3. Disconnect the electrical connectors.

4. Release the retaining tabs.

5. Tow Vehicle Electrical Receptacle (1) » Remove Installation Procedure

6. Tow Vehicle Electrical Receptacle (1) » Install

7. Secure the retaining tabs.

8. Connect the electrical connectors.

9. Turn the 2 rear bumper fascia trailer hitch cover retainers (1)  a quarter turn counter clockwise and install.

10. Rear Bumper Fascia Trailer Hitch Cover Retainer (1) » Install [2x]