Limited Slip Differential Diagnosis

Step	Action	Values	Yes	No
1	Did you review the general description and perform the necessary inspections?	—	Go to Step 2	Refer to: Rear Drive Axle Description and Operation
2	Measure the rotational force of the axle using the following procedure: 1. Block the front wheels. 2. Raise and support the vehicle. Lifting and Jacking the Vehicle 3. Remove the tire and wheel. Tire and Wheel Removal and Installation 4. Using the J-42129 Wheel Hub Remover, measure the rotational force of the axle. 5. Repeat the procedure for the other axle. Does the force measure outside the specified range?	22–271 Y (30–200 lb ft)	Go to Step 3	System OK
3	Repair the rear axle. Did you complete the repair?	—	Go to Step 4	—
4	Operate the system in order to verify the repair. Did you correct the condition?	—	System OK	Go to Step 2