Rear Seat Recliner Outer Finish Cover Replacement - Inboard (Bench)

Rear Seat Recliner Outer Finish Cover Replacement - Inboard (Bench) Removal Procedure

Rear Seat Recliner Outer Finish Cover Replacement - Inboard (Bench) — figure 1

1. Place the opposite rear seat in the fold and tumble position.

2. Front Seat Bolt (1) » Remove

3. Using a suitable plastic trim tool, release the retaining tabs.

4. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Remove Installation Procedure

5. Rear Seat Recliner Outer Finish Cover - Inboard (2) » Install

Caution

Refer to Fastener Caution.

2. Front Seat Bolt (1) » Install and tighten — Fastener Specifications
3. Return the opposite rear seat to the original position.