Outside Rearview Mirror Glass Replacement
Removal Procedure

- Apply masking tape over the outside rearview mirror glass (1).

- Apply pressure inward at the top of the outside rearview mirror glass (1) until full travel is reached.

- Firmly grasp the outer bottom edge of the outside rearview mirror glass (1).

-
Retaining pressure on the outside rearview mirror glass (1), pull outward until the outside rearview mirror glass is released from the outside rearview mirror actuator (2).
-
Disconnect all electrical connectors. Installation Procedure
-
Connect all electrical connectors.
-
Carefully align the outside rearview mirror glass (1) retainers with the outside rearview mirror actuator (2).
-
Place one hand on the back of the mirror housing and carefully apply pressure to outside rearview mirror glass (1) until outside rearview mirror glass is fully secured.
-
Remove the masking tape from the outside rearview mirror glass (1).
-
Inspect the outside rearview mirror for proper operation.