Rear Seat Position Center Reading and Courtesy Lamp Replacement

Rear Seat Position Center Reading and Courtesy Lamp Replacement Removal Procedure

Rear Seat Position Center Reading and Courtesy Lamp Replacement — figure 1

1. Insert a suitable flat-bladed plastic trim tool between the rear seat position center reading and courtesy lamp (1) and headlining trim panel (2).
2. Separate the rear seat position center reading and courtesy lamp (1) from the headlining trim panel (2).

Rear Seat Position Center Reading and Courtesy Lamp Replacement — figure 2

3. Pull downward to release the retaining tabs.

4. Rear Seat Position Center Reading and Courtesy Lamp (1) » Remove

5. Disconnect the electrical connector. Installation Procedure

6. Connect the electrical connector.

7. Rear Seat Position Center Reading and Courtesy Lamp (1) » Install

8. Apply pressure upward on the rear seat position center reading and courtesy lamp (1) to engage the retaining tabs.